Camry Wagon L4-132 2164cc 2.2L DOHC (5S-FE) (1995)
/Page-504003.png)
-
Remove the 2 nuts, and disconnect the 3 wires from the ignition coil terminals.
-
Remove the 4 screws and ignition coil.
5. REMOVE DISTRIBUTOR WIRE FROM THE DISTRIBUTOR HOUSING.
6. REMOVE THE SCREW AND CONDENSER.
7. INSPECT THE DISTRIBUTOR SHAFT.
-
Turn the shaft and check that it is not rough or worn.
-
If it feels rough or worn, replace the distributor housing assembly.
