Camry Wagon L4-132 2164cc 2.2L DOHC (5S-FE) (1995)
/Page-504004.png)
ASSEMBLY
1. INSTALL THE CONDENSER WITH THE SCREW.
2. INSTALL DISTRIBUTOR WIRE.
-
Install the grommet of the wire to the distributor housing.
3. INSTALL IGNITION COIL.
-
Remove any old packing (FIPG) material.
-
Apply seal packing to the ignition coil installing surface of the housing as shown in the illustration.
(Seal packing: Part No. 08826-00080 or equivalent)
-
Install the ignition coil with the 4 screws.
