Camry Wagon L4-132 2164cc 2.2L DOHC (5S-FE) (1995)
/Page-1976002.png)
Fig. 38 Fuel Sender Gauge Inspection.
8. Ensure voltage rises between terminals 2 and 3 as the float is moved from top to bottom position.
9. Measure resistance between terminals 2 and 3 for each float position. Resistance should be as follows:
a. Full position: about 3.0 ohms.
b. Empty position: about 110.0 ohms.
c. If resistance is not as specified, replace sender gauge.
