Camry Wagon L4-132 2164cc 2.2L DOHC (5S-FE) (1995)
-
Install the Throttle Body with the appropriate fasteners.
Type A: Install 4 bolts.
-
A: 45 mm (1.77 in)
-
B: 55 mm (2.17 in)
Type B: Install 2 bolts and 2 nuts.
Torque: 19 Nm (14 ft.lb)
-
Connect the following hoses to the throttle body:
1. PCV hose
2. Two vacuum hoses from the EGR vacuum modulator
3. Vacuum hose from the TVV for EVAP
-
Connect the idle air control valve connector.
-
Connect the throttle position sensor connector.
3. INSTALL AIR CLEANER CAP, RESONATOR AND AIR CLEANER HOSE.
-
Connect the air cleaner hose to the throttle body.
-
Install the air cleaner cap together with the resonator and air cleaner hose.
-
California spec vehicles only:
-
Connect the air hose to the air cleaner hose
-
Connect the intake air temperature sensor connector.