Camry Wagon L4-132 2164cc 2.2L DOHC (5S-FE) (1995)
/Page-1470007.png)
g. Using SST and torque wrench, measure the preload.
SST 09564-32011
Preload (at starting): 0.8 - 1.6 N.m (8 - 16 kgf-cm, 6.9 - 13.9 in.-lbf)
If the preload is not within specification, remove the transmission case side bearing retainer.
Select another shim.
HINT: The preload will change about 0.3 - 0.4 N.m (3 - 4 kgf-cm, 2.6 - 3.5 in-lbf) with every 0.05 mm (0.0019 in.) change in shim
thickness.
h. Remove the retainer bolts.
i.
Remove the bearing retainer and shim.
j.
Remove the case bolts.
k. Remove the transmission case.
