Camry Wagon L4-2.0L (3S-FE) (1990)
-
Put a piece of cloth or an equivalent as shown.
-
Use compressed air to remove the piston from the cylinder.
WARNING: Do not place your fingers in front of the piston when using compressed air. Injury WILL result.
-
Using a screwdriver remove the piston seal.
REASSEMBLE CALIPER
-
Apply lithium soap base glycol grease to following parts:
-
Main pin boot
-
Sliding bushing and dust boots
-
Piston, piston seal and cylinder boot
-
Install piston seal and piston in cylinder