Camry Wagon L4-2.0L (3S-FE) (1990)
-
Slide out the rear shoe.
-
Remove the tension spring from the rear shoe.
-
Disconnect the parking brake cable from the parking brake shoe lever.
-
Remove the shoe hold-down spring cups, springs and pins.
INSPECTION AND REPAIR OF PARKING BRAKE COMPONENTS
-
Inspect the disassembled parts for wear, rust or damage.
-
Measure brake shoe lining thickness
Standard thickness: 2.0 mm (0.079 in.)
Minimum thickness: 1.0 mm (0.039 in.)
-
If the shoe lining is less than minimum or shows signs of uneven wear, replace the parking brake shoes.
-
Measure brake disc inside diameter
Standard inside diameter: 170 mm (6.69 in.)
Maximum inside diameter: 171 mm (6.73 in.)
NOTE:If the disc is scored or worn, the brake disc may be lathed to the maximum inside diameter.