Camry Wagon L4-2.0L (3S-FE) (1990)
(d) Remove the two 0-rings and gasket.
6. Disassemble water pump and water pump cover
Remove the three bolts, water pump and gasket from the pump cover.
Inspection Of Water Pump Inspect Water Pump
Turn the pulley and check that the water pump bearing moves smoothly and quietly.
Installation Of Water Pump
1. Assemble water pump and water pump cover
Install a new gasket and the pump to the pump cover with the three bolts.
Torque: 90 kg-cm (78 in.lb, 8.8 N-m)
2. Install water pump and water pump cover assembly
(a) Install two new 0-rings and gasket to the pump cover and water by-pass pipe.
(b) Apply a light coat of engine oil on the 0-ring of the water by-pass pipe.
(c) Connect the pump cover to the water by-pass pipe. Do not install the nuts yet.