Camry Wagon L4-2.0L (3S-FE) (1990)
/Page-833013.png)
b. Tag the bearings to show the location for reassembly.
10. REMOVE OVERDRIVE PLANETARY RING GEAR FROM COUNTER DRIVE GEAR
a. While pulling up the ring gear, compress the snap ring with needle-nose pliers and remove it from the groove.
b. Remove the ring gear from the counter drive gear.
c. Remove the snap ring from the ring gear.
11. REMOVE OUTER RACES FROM COUNTER DRIVE GEAR
a. Drive out the two races with a brass bar and hammer.
