Camry Wagon L4-2.0L (3S-FE) (1990)
b. Remove the retaining plate and two springs.
c. Remove the accumulator piston.
d. Remove the O-ring from the piston.
2. REMOVE OIL SEAL RINGS
Spread the two rings apart and remove them.
ASSEMBLY OF OVERDRIVE CASE
1. INSTALL OIL SEAL RINGS ON OVERDRIVE CASE
Spread the two rings apart and install them into the groove.
HINT: After installing the oil seal rings, check that they move smoothly.
2. INSTALL C0 ACCUMULATOR PISTON TO OVERDRIVE CASE