Camry Wagon L4-2.0L (3S-FE) (1990)
Standard inside diameter: 19.025 - 19.050 mm
(0.7490 - 0.7500 in.)
If the inside diameter is greater than the maximum, replace the flange.
2. REMOVE RING GEAR FLANGE
a. Using a screwdriver, remove the snap ring.
b. Remove the flange from the ring gear.
3. INSTALL RING GEAR FLANGE
a. Position the flange into the ring gear.
b. Using a screwdriver, install the snap ring.
INSPECTION OF FRONT PLANETARY GEAR