Camry Wagon L4-2.0L (3S-FE) (1990)
1. INSTALL SUN GEAR TO DRUM
a. Install the sun gear to the drum.
b. Using snap ring pliers, install the snap ring to drum.
2. INSTALL THRUST WASHER TO SUN GEAR INPUT DRUM
3. INSTALL NO.1 ONE-WAY CLUTCH ON SUN GEAR
While turning the hub clockwise, slide the No.1 one-way clutch onto the sun gear.
4. RECHECK OPERATION OF NO.1 ONE-WAY CLUTCH
INSPECTION OF PLANETARY RING GEAR
1. INSPECT RING GEAR FLANGE BUSHING
Using a dial indicator, measure the inside diameter of the flange bushing.