Camry Wagon L4-2.0L (3S-FE) (1990)
7. INSTALL UPPER VALVE BODY COVER GASKETS, PLATE AND THROTTLE MODULATOR OIL STRAINER
a. Position a new gasket and plate and then another new gasket.
HINT: Both gaskets are same one.
b. Install the oil strainer onto the gasket.
8. INSTALL UPPER VALVE BODY COVER
a. Position the upper valve body cover.
b. Install and finger tighten the nine bolts.
HINT: Each bolt length (mm (in.)) is indicated in the figure.
9. TIGHTEN BOLTS OF UPPER AND LOWER VALVE BODIES
a. Tighten the twelve bolts in the upper valve body.
Torque: 55 kg-cm (48 in.-lb, 54 N.m)