Camry Wagon V6-180.5 2959cc 3.0L DOHC (3VZ-FE) (1993)
Air Door Actuator / Motor: Service and Repair
Air Inlet Servomotor
REMOVAL
1. Remove glove compartment.
2. Remove electronic control unit (ECU) and ECU bracket.
3. Remove servomotor.
a. Disconnect the connector.
b. Remove the two screws and the servo motor.
INSTALLATION
1. Install servomotor.
a. Install the servomotor with two screws.
b. Connect the connector.
2. Install ECU and ECU bracket.
3. Install glove compartment.