Camry Wagon V6-180.5 2959cc 3.0L DOHC (3VZ-FE) (1993)
Alignment: Service and Repair
Vehicle Ride Height
MEASURING VEHICLE HEIGHT
Front vehicle height
Measuring point:
Measure from the ground to the center of the front side lower arm mounting bolt.
NOTICE: Before inspecting the wheel alignment, adjust the vehicle height to specification.
If the vehicle height is not to specification, try to adjust it by pushing down on or lifting the body.
Rear vehicle height
Measuring point:
Measure from the ground to the center of the strut rod mounting bolt.
NOTICE: Before inspecting the wheel alignment, adjust the vehicle height to specification.
If the vehicle height is not to specification, try to adjust it by pushing down on or lifting the body.