Camry Wagon V6-180.5 2959cc 3.0L DOHC (3VZ-FE) (1993)
/Page-229003.png)
8. INSTALL LH CAMSHAFT TIMING PULLEY
a. Slide the timing pulley, facing the flange side outward.
b. Align the knock pin hole of the camshaft with the knock pin groove of the timing pulley as shown.
c. Install the knock pin.
d. Using SST. install and torque the bolt.
SST: 09278-54012
Torque: 108 N.m (1,100 kgf.cm, 80 ft.lbf)
9. SET NO.1 CYLINDER TO TDC/COMPRESSION
a. (Crankshaft Position)
Turn the crankshaft pulley, and align its groove with the "0" timing mark of the No.1 timing belt cover.
