Camry Wagon V6-180.5 2959cc 3.0L DOHC (3VZ-FE) (1993)
/Page-229006.png)
f.
Using SST, align the knock pin hole of the camshaft with the knock pin groove (3V mark side) of the pulley and install the knock pin.
SST: 09278-54012
g. Using SST, install and torque the bolt.
SST: 09249-63010 and 09278-54012
Torque: 75 N.m (760 kgf.cm, 55 ft.lbf)
HINT: Use a torque wrench with a fulcrum length of 340 mm (13.39 in.)
12. SET TIMING BELT TENSIONER
a. Using a press, slowly press in the push rod using 981-9,807 N (100-1,000 kgf, 200-2,205 lbf) of pressure.
b. Align the holes of the push rod and housing, pass a 1.5 mm hexagon wrench through the holes to keep the setting position of the push rod.
c. Release the press.
d. Install the dust boot to the tensioner.
13. INSTALL TIMING BELT TENSIONER
