Camry Wagon V6-180.5 2959cc 3.0L DOHC (3VZ-FE) (1993)
/Page-917005.png)
1. POSITION NO.1 PLATE AND NEW GASKETS ON UPPER VALVE BODY
Position new No.1 gasket, No.1 plate and then new No.2 gasket on the upper valve body.
HINT: Since No.1 gasket and No.2 gasket are similar, use the illustration below to discriminate between them.
2. PLACE UPPER VALVE BODY WITH NO.1 PLATE AND GASKETS ON LOWER VALVE BODY
Hold the upper valve body, No.1 plate and gaskets securely so they do not separate.
Align each bolt hole in the valve bodies with the gaskets and plate.
