Camry Wagon V6-180.5 2959cc 3.0L DOHC (3VZ-FE) (1993)
/Page-981002.png)
INSPECT SHIFT LEVER PRELOAD
a. Remove the shift lever ball cover, selecting bellcrank and torsion spring.
b. Install and torque the shift lever ball cover.
Torque: 5.0 N.m (50 kgf-cm, 43 in-lbf)
c. Selecting shim of a thickness that allow a preload of 0.49 - 14.7N (60 - 150 kgf, 0.1 - 0.3 lbf) at the top of lever and install it in the shift lever
seat.
