toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Windows - Wire Type Regulator Assembly Installation|Page 5488 > < Windows - Wire Type Regulator Assembly Installation|Page 5486
Page 1
background image

Technical Service Bulletin # BO94015

Date: 941021

Windows - Power Window Regulator Now Available

REF.: BODY

NO.: BO94-015

DATE: OCTOBER 21, 1994

MODEL: AE, AT ST, SK, VK, GK, JA

WIRE TYPE REGULATOR SUBASSEMBLY, POWER DOOR WINDOW

To improve power door window serviceability on Corolla, Celica, Camry and Supra, a wire regulator subassembly is now available as separate supply
parts. See illustration.

REPAIR PROCEDURES:

^

Verify motor operates properly.

^

If the motor must be replaced, change the complete regulator assembly.

^

If motor operation is correct, replace only the regulator subassembly.

Use the following procedures when replacing the subassembly. Refer to the appropriate section of the repair manual for window regulator removal
procedures.

Window Regulator Disassembly

1.

REMOVE COVER PLATE

Screw type cover plate:

Windows - Wire Type Regulator Assembly Installation|Page 5488 > < Windows - Wire Type Regulator Assembly Installation|Page 5486