Camry Wagon V6-2507cc 2.5L DOHC (2VZ-FE) (1988)
/Page-1178002.png)
If your staff requires any technical assistance, please have them contact our TMS Technical Assurance Department in Torrance, California.
Thanks again for your cooperation.
REIMBURSEMENT PROCEDURE
The following instructions should be used when submitting claims for paint damage repair for the THM Camry vehicles specified above.
*
Many repairs will not require maximum labor hours, therefore claim actual time required for repair up to the maximum allowed.
^
Claim type: Submit claim using regular (RG) claim type.
^
Use original part number: 63111-32050
^
Trouble codes: Use T-1 = 61 and T-2 = 99
^
Condition/Cause/Remedy: Describe repair performed in detail.
^
Sublet: If materials are required, use sublet "xx". If portions of the repair must be sublet by the dealer, claim those portions of the repair in the
sublet section of the claim and adjust the labor hours accordingly.
^
Authorization: Authorization is required by DSM only for Repair Class 4.
Inspectton and Repair Procedures
The following procedures will assist in the inspection, classification, and repair of the TMM Camry vehicles that may have been subject to paint damage
on horizontal surfaces only caused by an undetermined type of fallout prior to arrival at your facility.
DESCRIPTION
^
The horizontal surfaces of the vehicle that include the hood, roof, and decklid may exhibit small areas between 1/16" and 1/2" in diameter that
have the appearance of dry water spots.
^
Unlike water spots, these spots are not removed by rubbing with a damp cloth.
^
On close inspection, the paint appears to be etched around the edge of the spot and the interior is visibly sunken into paint surface.
INSPECTION PROCEDURE
