Camry Wagon V6-2507cc 2.5L DOHC (2VZ-FE) (1988)
Brake Rotor/Disc: Service and Repair
Front
Fig. 27 Exploded view of axle hub & steering knuckle (typical). Front wheel drive models
FRONT WHEEL DRIVE MODELS
1.
Raise and support front of vehicle, then remove tire and wheel assembly.
2.
Remove cotter pin and bearing locknut cap.
3.
With brake pedal depressed, remove bearing locknut, Fig. 27.
4.
Remove brake caliper from steering knuckle and suspend out of way.
5.
Remove disc rotor, then ensure that bearing play in axial direction does not exceed .002 inch.
6.
Remove cotter pin and nut, then, using suitable puller, disconnect tie rod end from steering knuckle.