Camry Wagon V6-2507cc 2.5L DOHC (2VZ-FE) (1988)
Radiator Cooling Fan Temperature Sensor / Switch: Technical Service Bulletins
Cooling System - Added Sensor For Fan
REFERENCE:
ENGINE
NUMBER:
005
DATE:
04-28-89
MODEL:
CAMRY (2VZ-E)
TITLE ADDITIONAL WATER TEMPERATURE SENSOR FOR ENGINE FAN
To improve cooling system performance, one additional water temperature sensor has been installed to control the engine cooling fan separately. The
additional water temperature sensor is installed at the water inlet area (see figure below). The existing water temperature sensor controls the A/C
amplifier assembly.
PRODUCTION CHANGE INFORMATION:
Starting VIN
Production Date
JT2VV2 # * # J 0011533
MAY 1988
PART NUMBER INFORMATION:
Interchangeability:
Parts are not interchangeable. Do not attempt to retro-fit new parts to pre-production change vehicles as the cooling fan relay will not adapt to the new
amplifier assembly.
Previous P/N
New P/N
Part Name
N/A
*
89429-16010
Additional Water Temp Sensor
85927-32041**
88650-20340
Amplifier assy. cooler stabilizer
82121-32880
82121-32881
Engine Wire For MTM
82121-32890
82121-32891
Engine Wire for ATM
*
Previous sensor was for both the A/C and E/G cooling fan. ** Previous part name was cooling fan relay.
OPERATING TEMPERATURE INFORMATION:
FAN SPEED
PREVIOUS
NEW
0
98.5~ or less
85~C or less
(209~F or less)
(185~F or less)
LOW
98.5~c - 101~C
85~C - 90~C
(209~F - 214~F)
(185~F - 194~F
HI
101~C or higher
90~C or higher
(214~F or higher)
(194~C or higher)