Camry Wagon V6-2507cc 2.5L DOHC (2VZ-FE) (1988)
Engine Oil Pressure: Testing and Inspection
OIL PRESSURE CHECK
1. CHECK ENGINE OIL QUALITY
Check the oil for deterioration, entry of water, discoloring or thinning.
If the quality is poor, replace the oil.
Use engine oil of API grade SG. Deterrnine the viscosity appropriate for the climate temperature in accordance with the recommended viscosity
shown in the illustration. Use of multigrade and fuel-efficient oil is recommended.
2. CHECK ENGINE OIL LEVEL
The oil level should be between the "L" and "F" marks on the dipstick.
If low, check for the leakage and add oil up to "F" mark.
3. REMOVE OIL PRESSURE SWITCH
4. INSTALL OIL PRESSURE GAUGE
5. WARM UP ENGINE
Allow the engine to reach normal operating temperature.
6. CHECK OIL PRESSURE
Oil pressure:
At idling
0.3 kg/cm2 (4.3 psi, 29 kPa) or more
At 3,000 rpm
3.0-5.5 kg/cm2 (43-78 psi, 294-539 kPa)
7. REINSTALL OIL PRESSURE SWITCH