Camry Wagon V6-2507cc 2.5L DOHC (2VZ-FE) (1988)
/Page-318005.png)
HINT: Arrange the RH and LH pulleys.
19. REMOVE NO.2 IDLER PULLEY
Remove the bolt and idler pulley.
20. REMOVE CRANKSHAFT PULLEY
a. Using SST, remove the pulley bolt.
SST:
09213-54014 (Body)
90213-70010 (90105-08076 (Bolt) and
09330-00021
HINT: (Re-using timing belt): When the crankshaft pulley bolt is loosened, the position of the timing mark of the crankshaft pulley and the
installation mark may slip, so check and align them again.
