Camry Wagon V6-2507cc 2.5L DOHC (2VZ-FE) (1988)
Wheel Hub: Service and Repair
Rear
Rear Axle Hub & Carrier
Fig. 8 Exploded view of all wheel drive rear axle hub & carrier assembly
REAR AXLE HUB & CARRIER, REPLACE
1.
Remove cotter pin, bearing locknut cap and bearing locknut, Fig. 8.
2.
Disconnect parking brake cable, then remove brake caliper.
3.
Remove rotor disc. Before removing rotor, place alignment marks on the axle hub and rotor disc.
4.
Check axial bearing play. Bearing play should be .0020 inch or less.