toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

On-Vehicle Inspection|Page 2224 > < On-Vehicle Inspection|Page 2222
Page 1
background image

Idle Speed/Throttle Actuator - Electronic: Testing and Inspection
Off-Vehicle Inspection

INSPECTION

1. Connect the positive (+) lead from the battery to terminal +B and negative (-) lead to terminal RSC, and check that the valve is closed.

2. Connect the positive (+) lead from the battery to terminal +B and negative (-) lead to terminal RSO, and check that the valve is open.
3. If operation is not as specified. replace the Idle Air Control Valve.

On-Vehicle Inspection|Page 2224 > < On-Vehicle Inspection|Page 2222