Camry Wagon V6-3.0L (1MZ-FE) (1994)
/Page-845002.png)
^
Remove the 3 nuts. EGR Valve and Vacuum Modulator assembly and gasket.
Installation
1. Reinstall EGR Valve and Vacuum Modulator assembly with the 3 nuts.
Torque: 12 Nm (9 ft lb).
^
Reconnect the following hoses:
Vacuum hose from port P of EGR Vacuum Modulator. (1)
Vacuum hose from port Q of EGR Vacuum Modulator. (2)
Vacuum hose from port R of EGR Vacuum Modulator. (3)
Vacuum hose from EGR Valve. (4)
2. Reconnect the EGR Gas Temperature Sensor connector.
3. Reconnect the negative (-) terminal of the battery.
