Camry Wagon V6-3.0L (1MZ-FE) (1994)
Vacuum hose (from charcoal canister). (1)
Vacuum hose (from port R of Exhaust Gas Recirculation Vacuum Modulator). (2)
Vacuum hose (from port R of Exhaust Gas Recirculation Vacuum Modulator). (3)
Vacuum hose (from upper port of Thermal Vacuum Valve). (4)
Vacuum hose (from lower port of Thermal Vacuum Valve). (5)
Install the hose clamp. (e)
Connect the Idle Air Control Valve Connector. (f)
Connect the Throttle Position Sensor connector. (g)
2. Install Air Cleaner Hose.
^
Install the air cleaner hose with the 2 hose clamps.
^
Connect the Positive Crankcase Ventilation hose.
3. Connect throttle cable.
4. Connect accelerator cable.
5. Fill engine with coolant.
Capacity: 8.7 liters (9.2 US qts)
6. Connect Negative (-) Terminal Cable To Battery.