Camry Wagon V6-3.0L (1MZ-FE) (1994)
/Page-579001.png)
Air Flow Meter/Sensor: Service and Repair
REMOVAL
1. Disconnect negative (-) terminal cable from battery.
CAUTION: Work must be started after 90 seconds from the time the ignition switch is turned to the LOCK position and the negative (-) terminal
cable is disconnected from the battery.
2. Remove air cleaner hose.
^
Disconnect the Positive Crankcase Ventilation (PCV) hose.
^
Loosen the 2 hose clamps. and remove the air cleaner hose.
3. Remove the Mass Air Flow (MAF) Meter.
^
Disconnect the MAF Meter connector.
^
Remove the 2 bolts and MAF Meter.
INSTALLATION
1. Install MAF Meter
^
Insert the MAF Meter end into the air cleaner case.
^
Secure the MAF Meter with the 2 bolts.
Torque: 6.9 Nm (61 in lb)
^
Connect the MAF Meter connector.
2. Install Air Cleaner Hose
^
Install the air cleaner hose with the 2 hose clamps.
^
Connect the PCV hose.
