Camry Wagon V6-3.0L (1MZ-FE) (1994)
EGR Temperature Sensor: Service and Repair
Installation
PROCEDURE
Installation
1. Reinstall Exhaust Gas Recirculation (EGR) Gas Temperature Sensor.
Torque: 20 Nm (14 ft lb).
2. Reinstall EGR Valve and Vacuum Modulator assembly with the 3 nuts.
Torque: 12 Nm (9 ft lb).
^
Reconnect the following hoses:
Vacuum hose from port P of EGR Vacuum Modulator. (1)
Vacuum hose from port Q of EGR Vacuum Modulator. (2)
Vacuum hose from port R of EGR Vacuum Modulator. (3)
Vacuum hose from EGR Valve. (4)
3. Reconnect the EGR Gas Temperature Sensor connector.
4. Reconnect the negative (-) terminal of the battery.