Camry Wagon V6-3.0L (1MZ-FE) (1994)
9.
REMOVE BOLT FROM THE LOWER VALVE BODY
See Figure 10.
10.
REMOVE BOLTS FROM UPPER VALVE BODY
Remove the three bolts.
NOTE:
Each bolt length mm (in.) is indicated in the Figure 11.
11.
LIFT OFF UPPER VALVE BODY AND NO. 1 PLATE AS A SINGLE UNIT
Hold upper valve body, No. 1 plate and gaskets together while separating from the lower valve body.
CAUTION:
Be careful that the two check balls and oil strainer do not fall out.