Camry Wagon V6-3.0L (1MZ-FE) (1994)
c. Place the synchronizer ring on the gear and align the ring slots with the shifting keys.
d. Using a press. install the 1st gear and No.1 hub sleeve.
3. INSPECT 1ST GEAR THRUST CLEARANCE
Using a feeler gauge. measure the 1st gear thrust clearance.
Standard clearance: 0.10 - 0.29 mm (0.0039 - 0.0114 in.)
4. INSTALL SYNCHRONIZER RINGS, 2ND GEAR, NEEDLE ROLLER BEARING AND 3RD DRIVEN GEAR
a. Install the ball.
b. Fit the 2nd gear bushing groove securely over the ball when installing the 2nd gear bushing on the shaft.