toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Continuity Checks|Page 7496 > < Continuity Checks|Page 7494
Page 2
background image

After 1 more key code have been registered with master key, perform step (1) or (2) without pulling the key out or inserting the already
registered key

1. Depress and release brake pedal 5 times or more within 15 sec.
2. With the TOYOTA hand-held tester, require automatic registration mode completion.

2. REGISTRATION OF ADDITIONAL MASTER KEY

There are 2 ways for registration of additional master key, one is depressing brake pedal and acceleration pedal and the other is using TOYOTA
hand-held tester.

HINT:
-

It is possible to register up to 7 master key codes including the already registered key code

-

When any operation time described below is over, registration mode completes.

-

When the next procedure is performed while the timer is working, the timer completes counting time, then next timer starts.

1. Depressing brake pedal and acceleration pedal:

Continuity Checks|Page 7496 > < Continuity Checks|Page 7494