toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Antitheft Lighting Relay|Testing and Inspection > < Diagram Information and Instructions|Page 7667
Page 1
background image

Antitheft Lighting Relay: Description and Operation

CIRCUIT DESCRIPTION 
When the theft deterrent system is activated, it causes the Tr in the ECU to switch ON and OFF at approximately 0.4 sec. intervals. This switches the
taillights/headlights control relay ON and OFF, thus flashing the taillights/headlights.

In this condition, if any of the following operations is done, the Tr in the ECU goes OFF and the taillight control relay switches OFF, thus stopping the
taillights flashing:

1. Unlock the front LH or RH door with a key.
2. Turn the ignition switch to ACC or ON position.
3. Unlock the doors with the wireless door lock control system.
4. Wait for approximately 60 seconds.
5. Push the panic switch of the wireless door lock control system.

Antitheft Lighting Relay|Testing and Inspection > < Diagram Information and Instructions|Page 7667