toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Ignition Switch and Key Unlock Warning Switch|Page 7929 > < Ignition Switch and Key Unlock Warning Switch
Page 2
background image

d. Disconnect the negative (-) lead from the battery to terminal 6.
e. Check that the buzzer stops sounding.

f.

Connect the negative (-) lead from the battery to terminal 6.

g. Disconnect the negative (-) lead from the battery to terminal 5.
h. Check that the buzzer stops sounding.

If operation is not as specified, replace the relay.

Key Unlock Warning System:
INSPECT INTEGRATION RELAY (TYPE C) OPERATION

a. Connect the positive (+) lead from the battery to terminal 1.
b. Connect the negative (-) lead from the battery to terminals 5,6 and 10.
c. Check the buzzer sounds.

d. Disconnect the negative (-) lead from the battery to terminal 6.
e. Check that the buzzer stops sounding.

Ignition Switch and Key Unlock Warning Switch|Page 7929 > < Ignition Switch and Key Unlock Warning Switch