Camry XLE Sedan L4-2164cc 2.2L DOHC (5S-FE) MFI (1999)
NOTICE:
-
When removing the ECU from the actuator, it must be removed it upward.
-
At the time of reassembly, tighten the screws according to the order shown.
b. Remove the ECU from the actuator.
NOTICE: Protect the actuator in order to prevent sealing surface from getting dirty and causing damage on the valve body. If the dirt and the
like are stuck to the sealing surface, use plastic tools or soft objects to remove the din. Do not use chemical solvents.
REASSEMBLY
Reassembly is in the reverse order of disassembly.