Camry XLE Sedan L4-2164cc 2.2L DOHC (5S-FE) MFI (1999)
_mfi/Page-1643002.png)
Measuring Point Reference
4. INSPECT TOE-IN
If the toe-in is not within the specification, adjust it at the No.2 lower suspension arm.
5. ADJUST TOE-IN
a. Measure the length of the left and right No.2 lower suspension arms.
If the left-right difference is larger than the specification, adjust the length.
No.2 lower suspension arm length difference: 1 mm (0.04 inch) or less
b. Loosen the lock nuts.
c. Turn the left and right lower suspension arms an equal amount to adjust toe-in.
HINT:
^
Try to adjust the toe-in to the center value.
^
One turn of the each adjusting tube will adjust the toe-in about 36' (0.6°, 6.7 mm, 0.264 inch).
d. Torque the lock nuts.
Torque: 56 Nm (570 kgf-cm, 41 ft. lbs.)
