Camry XLE Sedan L4-2164cc 2.2L DOHC (5S-FE) MFI (1999)
c. Coat a new bearing with molybdenum disulfide lithium base grease.
d. Using SST, press in the bearing.
SST 09950-60010 (09951-00310), 09950-70010 (09951-07200)
e. Coat a new bearing with molybdenum disulfide lithium base grease.
f.
Using SST, press in the bearing.
SST 09950-60010 (09951-00320), 09950-70010 (09951-07200)
4. IF NECESSARY, REPLACE OIL SEAL
a. Using SST, remove the oil seal from the bushing.
SST 09527-20011, 09612-24014 (09613-22011)
NOTICE: Be careful not to damage the bushing.
b. Coat a new oil seal lip with power steering fluid.
c. Using SST, press in the oil seal.
SST 09950-60010 (09951-00240, 09951-00400, 09952-06010)
NOTICE: Make sure to install the oil seal facing the correct direction.