toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Throttle Valve Cable/Linkage, A/T > < Diagram Information and Instructions|Page 5077
Page 1
background image

Shift Solenoid: Service and Repair

ON-VEHICLE REPAIR 

1. REMOVE PARK/NEUTRAL POSITION SWITCH.  Refer to Transmission Position Switch/Sensor.
2. DISCONNECT SHIFT SOLENOID VALVE SL CONNECTOR

3. REMOVE SHIFT SOLENOID VALVE SL

a. Remove the 2 bolts and shift solenoid valve SL.
b. Remove the 2 O-rings from the shift solenoid valve SL.

4. INSTALL SHIFT SOLENOID VALVE SL

a. Coat 2 new O-rings with ATF and install them to the shift solenoid valve SL.
b. Install the shift solenoid valve SL and 2 bolts.

5. CONNECT SHIFT SOLENOID VALVE SL CONNECTOR
6. INSTALL PARK/NEUTRAL POSITION SWITCH

Throttle Valve Cable/Linkage, A/T > < Diagram Information and Instructions|Page 5077