Camry XLE Sedan V6-3.0L (1MZ-FE) (1998)
4. Warm up engine.
Allow the engine to warm up to normal operating temperature.
5. Check oil pressure.
Oil pressure:
At idle: 29 kPa (4.3 psi) or more
At 3,000 rpm: 294 - 539 kPa (43 - 78 psi)
6. Remove oil pressure gauge and reinstall oil pressure switch.
a. Remove the oil pressure gauge.
b. Apply adhesive to 2 or 3 threads of the oil pressure switch.
Adhesive: Part No. 08833 - 00080, THREE BOND 1344, LOCTITE 242 or equivalent
c. Using SST, install the oil pressure switch.
Torque: 13 Nm (9 ft. lbs.)
7. Start engine and check for leaks.