toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Antenna - Troubleshooting Glass Printed Antenna|Page 7357 > < Antenna - Troubleshooting Glass Printed Antenna|Page 7355
Page 7
background image

Avalon (Glass Printed Antenna)

Refer to the following to check for antenna cable continuity.

Terminal Connection

Normal Condition

(1) - (2)

Continuity

(3) - (4)

No Continuity

NOTE:

The sub-antenna cord does not have continuity because it includes an in-line capacitor.

NOTE

Measure continuity from center contact to center contact as shown in the illustration.

Refer to the following illustrations to check proper grounding of the antenna cable, matching module, and choke coil.

1.

Check for a good antenna cable ground at the center console area.

2.

Check for a good matching module ground at the right C-pillar area.

Antenna - Troubleshooting Glass Printed Antenna|Page 7357 > < Antenna - Troubleshooting Glass Printed Antenna|Page 7355