Camry XLE Sedan 4-Door L4-2164cc 2.2L DOHC MFI (1997)
H.
Disconnect the hose from the oil cooler pipe of the radiator LH side.
NOTE:
Place a container below vehicle to catch any leaking ATF. Remove the other end of this hose from transaxle and discard.
I.
Connect the hose from oil cooler tube No.1 to the oil cooler pipe of the radiator LH side.
NOTE:
Install the hose damps with the hose damp clips at the positions shown, and use pliers to pull off the dips in the direction indicated by the
arrows.
J.
Install the 190 mm (7.48") hose between the oil cooler tube No.1 and transaxle oil cooler tube.
NOTE:
Install the hose clamps with the hose clamp clips at the positions shown, and use pliers to pull off the clips in the direction Indicated by the
arrows.
