Camry XLE Sedan 4-Door L4-2164cc 2.2L DOHC MFI (1997)
Drink Holders: Technical Service Bulletins
Interior Trim - Rear Cupholder Improved
BODY
BO007-98
April 3, 1998
Title:
REAR CUPHOLDER IMPROVEMENT
Models:
'97 Camry
Introduction
Changes have been made to improve the performance of the rear cupholder on 1997 U.S. built Camrys.
Affected Vehicles
1997 U.S. built Camrys within the following VIN ranges:
Plant 1
4T1BG22K * VU000074 to 4T1BG22K * VU182355
4T1BF22K * VU000072 to 4T1BF22K * VU039806
Plant 2
4T1BG22K * VU748185 to 4T1BG22K * VU824087
4T1BF22K * VU900327 to 4T1BF22K * VU923720
Parts Information
PREVIOUS PART NUMBER CURRENT PART NUMBER
PART NAME
55630-AA010-XX
Same
Cup Holder Assembly
Countermeasured parts can be identified by the addition of screws at the cupholder ring mounting locations.
Warranty Information
Applicable Warranty *:
This repair is covered under the Toyota Basic Warranty. This warranty is in effect for 36 months or 36,000 miles, whichever occurs first, from the
vehicle's in-service date.
*
Warranty application is limited to correction of a problem based upon a customer's complaint.