Camry XLE Sedan 4-Door L4-2164cc 2.2L DOHC MFI (1997)
^
Front Seat Outer Belt
^
Upper Center Pillar Garnish
^
Assist Grip
^
Sun Visor
^
Map Light Assembly
^
Dome Light
^
Sun Visor Holder Clips
CAUTION:
After removing the Sun Visor Holder Clips, hold up the front side of the Headliner to prevent the headliner from deforming.
2.
Remove the two rear clips and disconnect the headliner.
3.
Fit four pieces of urethane sponge to the oval hole positions of the Roof Reinforcement.
4.
Reinstall the headliner and removed parts in the reverse order of removal.
Front Seat Outer Belts Torque:
42 N.m (420 kgf.cm, 31 ft.lbf)
