Camry XLE Sedan 4-Door L4-2164cc 2.2L DOHC MFI (1997)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
ABS (TMC/Denso Made)
ABS Actuator (Nippondenso Type - ABS Only)
REPLACEMENT
1. Remove right front fender liner.
2. Remove A/C tube clamp bracket bolt.
Brake Line Disconnection From ABS Actuator
3. Disconnect brake lines.
Using Special Service Tool (SST) # 09751-36011, disconnect the 6 brake lines from the ABS Actuator.
Torque: 15 Nm (155 kg.cm, 11 ft. lbs.)
4. Remove ABS Actuator assembly.
(a) Disconnect the 2 connectors.
(b) Remove the 2 bolts, 2 nuts and ABS Actuator assembly.
Torque: 19 Nm (195 kg.cm, 14 ft. lbs.)
5. Remove ABS Actuator.
(a) Remove the 2 nuts and ABS Actuator from Actuator Bracket.
Torque: 5.4 Nm (55 kg.cm, 48 inch lbs.)
(b) Remove the 2 holders and 3 cushions from the ABS Actuator.
6. Installation in the reverse order of removal.
NOTE: After installation, fill brake reservoir with brake fluid, bleed brake system and check for leaks. See: Brake Bleeding