Camry XLE Sedan 4-Door L4-2164cc 2.2L DOHC MFI (1997)
-
Using a screwdriver, remove the piston seal from the cylinder.
4. Remove sliding pins and dust boots.
(a) Remove the 2 sliding pins from the torque plate.
CAUTION: Insert the sliding pin with sliding bushing into the bottom side.
(b) Using a screwdriver and hammer, tap out the 2 dust boots.
NOTE: Use a 22 mm socket wrench and tap in 2 new dust boots into the torque plate.
CAUTION: Confirm that the metal plate portion of the dust boot fits snugly in the torque plate.
REASSEMBLY
Reassembly is in the reverse order of disassembly.
CAUTION: Apply lithium soap base glycol grease to the parts indicated by arrows in EXPLODED VIEW.
INSTALLATION
Installation is in the reverse order of removal.
NOTE: After installation, fill brake reservoir with brake fluid, bleed brake system and check for leaks. See: Brake Bleeding
