Camry XLE Sedan 4-Door L4-2164cc 2.2L DOHC MFI (1997)
(b) Press in the piston with a hammer handle or similar implement.
NOTE: If the piston is difficult to push in, loosen the bleeder plug and push in the piston while letting some brake fluid escape.
(c) Install the Caliper.
(d) Hold the sliding pin and torque the installation bolt.
Torque: 34 Nm (350 kg.cm, 25 ft. lbs.)
(e) Install the flexible hose bracket and bolt.
Torque: 29 Nm (300 kg.cm, 21 ft. lbs.)
9. Install front wheel.
10. Check that fluid level is at max line.
