Camry XLE Sedan 4-Door L4-2164cc 2.2L DOHC MFI (1997)
CAUTION: Bleed air of the rear brake first. If front brake is bled first, rear brake air cannot be bled.
4. Bleed brake line.
(a) Slowly depress the brake pedal several times.
(b) While an assistant depresses the pedal, loosen the bleeder plug until fluid starts to run out. Then tighten the bleeder plug.
(c) Repeat this procedure until there are no more air bubbles in the fluid.
Bleeder plug tightening torque: 8.3 Nm (85 kg.cm, 74 inch lbs.)
5. Repeat procedure for each wheel.
