Camry XLE Sedan 4-Door L4-2164cc 2.2L DOHC MFI (1997)
2. Disconnect the 2 connectors from the Actuator.
ABS Actuator Sub-Harnesses G & L
3. Connect Actuator checker (SST).
(a) Connect the Actuator checker (SST) to the Actuator side wire harness via the sub-wire harness (SST), as shown.
SST 09990-00150, 09990-00250, 0999O-00300, 09990-00360
(b) Connect the red cable of the checker to the battery positive (+) terminal and black cable to the negative (-) terminal. Connect the black
cable of the sub-wire harness to the battery negative (-) terminal or body ground.
(c) Place the "SHEET P" (SST) on the Actuator checker.
SST O9990-OO43O
4. Inspect brake Actuator operation.
(a) Start the engine, and run it at idle.
ABS Actuator Checker SST 09990-00430
(b) Turn the selector switch of the Actuator checker to "FRONT LH" position.
(c) Push and hold in the MOTOR switch for a few seconds.
ABS Actuator Operation Check
(d) Depress the Brake Pedal and hold it until step (g) is completed.
(e) Push the MAIN push switch, and check that the Brake Pedal does not go down.
CAUTION: Do not keep the MAIN push switch pushed down for more than 10 seconds.
